How To Inflate An Inflatable Paddle Board？
Apr 23, 2024
Leave a message
How to inflate an inflatable paddle board
In recent years, there has been a growing trend in the past and present. The hard board is not the same as the original one, and the edition is available in a separate box, and the ideal selection for the mission and travel. How do you fill out the board below:
Process
On the flat, flexible surface of the square board, the rough ground such as mixed curdled earth or turquoise water can be placed on the surface of the surface.
General SUP expansion, get to the gate. Most of the time, the majority of the board came, the last place was in the tail, the next deck was opened, and the D-type was located.
Reverse time rotation screen opening
Inside the gate, one of the gates was seen. In front of the opening of the board, it was placed in an upright position. When the button is raised, the button is immediately opened; when the button is turned down, the button is immediately opened. When the current bar is installed, the pipe will be disconnected and the board will be closed. At the time of closing the board, the board was closed and the power of the board was too strong, and the image of the board was closed. In this case, the guaranteed air quality will improve.
Currently, it is time to start and complete. If you use the electric power, please wait for the command to open. After completion, the driver will close the vehicle. How do you use your hands, depending on your needs, learn how to use your own body, but don't use your hands, especially when you are in trouble when you start. In this case, it is unnecessary to curve the arm and arm, but keep the arm straight. Reciprocal, upper and lower strokes at the same time extend and curve the legs, and the image is shallow and kneeling. When the air force on the board is 7 psi, the force is recorded. At this time, it is easier to switch between the two. This is the manual design for the management. It is possible to change the demand for one piece of rod or one piece of rack. Please be aware that there is no need to forget to write, and the construction will stop when the board is reached. Now that the board is open, an explosive event that can be exposed for a long time has appeared.
Reverse time rotation switch, general cut open. No need to touch the door. Chushinnagi upper gate.
Compared to inflating, deflating is very simple, you just need to remove the valve cover and push down on the valve pin, then twist and lock it in the open position. After the air is released, roll up the paddle and put it in your backpack. That's it.
Inflating is not a quick process, especially when you use a hand pump to inflate, but it is a crucial process. Too high or too low air pressure in the paddle board will not only affect your playing experience, but also Your safety, so be sure to do this! We have manual dual-function pumps for you to choose from, and we also support customization.click here